Quadro: specification reference
Printer type: FDM
This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.
| Specification | Value | Notes | Evidence |
|---|---|---|---|
| Enclosure | open_frame | Manufacturer FAQ describes Quadro as an open-frame bed-slinger. A Quadro Enclosure with built-in air filtration is an optional add-on, not the base configuration. | Source |
| Maximum hotend temperature | 300 C | Official Quadro technical specifications list maximum hotend temperature 300°C. | Source |
| Included nozzles | 4 | Four independent toolheads; each toolhead has its own dedicated filament path and nozzle, per manufacturer FAQ. Treat as four nozzles/toolheads in the base configuration. | Source |
| Manufacturer material guidance | PLA, PETG, TPU, PVA, PLA-CF; ABS and ASA with optional Quadro Enclosure | Manufacturer FAQ lists PLA, PETG, TPU, PVA and PLA-CF for open-frame use, and ABS and ASA with optional enclosure. These are manufacturer-stated compatibility claims, not independent test results. | Source |
| Compatible slicers | Co Slicer (based on OrcaSlicer); QuadrOS (based on Klipper) | Manufacturer FAQ identifies Co Slicer, based on OrcaSlicer, and QuadrOS, based on Klipper. The FAQ says Co Slicer is available for Windows, macOS and Linux. | Source |
Build envelope: Published build envelope: Co Print Quadro: 300 × 300 × 300 mm (Source)
Compare this printer on GoodPrints3D
Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.
Catalog record version: 14. Specifications can be updated without changing the rating poll.