QIDI X-Smart 3: specification reference
Printer type: FDM
This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.
| Specification | Value | Notes | Evidence |
|---|---|---|---|
| Build width | 175 mm | Exact X-Smart 3, not X-Smart or Smart 5. Print size retains manufacturer ordering. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Build depth | 180 mm | Exact X-Smart 3, not X-Smart or Smart 5. Print size retains manufacturer ordering. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Build height | 170 mm | Exact X-Smart 3, not X-Smart or Smart 5. Print size retains manufacturer ordering. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Motion system | CoreXY | QIDI's exact-model X-Smart 3 product page identifies its motion system as CoreXY. Manufacturer description, not independent performance testing. | Source |
| Automatic bed leveling | Yes | QIDI states the exact X-Smart 3 has automatic leveling and says 16 points are used to calculate printing compensation. | Source |
| Advertised maximum speed | 500 mm/s | QIDI advertises a maximum printing speed of 500 mm/s for the exact X-Smart 3. This is a manufacturer maximum, not a measured print rate or a quality result. | Source |
| Advertised maximum acceleration | 20000 mm/s2 | QIDI advertises 20,000 mm/s2 acceleration for the exact X-Smart 3. Manufacturer specification, not independent performance testing. | Source |
| Manufacturer material guidance | PLA, ABS, PETG; the manufacturer page adds 'etc.' without enumerating a complete list. | Exact-model QIDI product page explicitly names PLA, ABS and PETG and says 'etc.' Do not treat the unspecified remainder as established compatibility. | Source |
| Compatible slicers | QIDI Slicer; QIDI Print is not compatible with the X-Smart 3. | QIDI's current official firmware/software page lists X-Smart3 firmware and identifies QIDI Slicer as compatible with high-speed Klipper printers. The same page explicitly excludes X-SMART3 from QIDI Print. Software versions can change. | Source |
Build envelope: Standard build area: QIDI X-Smart 3: 175 × 180 × 170 mm (Source)
Compare this printer on GoodPrints3D
Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.
Catalog record version: 16. Specifications can be updated without changing the rating poll.