MINGDA MD-600 Pro+: specification reference
Printer type: FDM
This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.
| Specification | Value | Notes | Evidence |
|---|---|---|---|
| Build width | 600 mm | Exact Pro+ revision, not the earlier MD-600 Pro. Product parameter dimensions take precedence over generic series marketing. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Build depth | 600 mm | Exact Pro+ revision, not the earlier MD-600 Pro. Product parameter dimensions take precedence over generic series marketing. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Build height | 600 mm | Exact Pro+ revision, not the earlier MD-600 Pro. Product parameter dimensions take precedence over generic series marketing. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Enclosure | Fully enclosed build envelope; temperature-controlled filament chamber | Exact MD-600 Pro+ product description. This describes the enclosure and the filament chamber without asserting that the build chamber is heated. | Source |
| Maximum hotend temperature | 350 C | Maximum extruder temperature listed as 350 C; manufacturer recommends operating at or below 320 C. | Source |
| Maximum bed temperature | 110 C | Maximum platform temperature listed as 110 C. | Source |
| Automatic bed leveling | Yes | Exact MD-600 Pro+ page describes one-touch automatic leveling with 25-point leveling. | Source |
| Manufacturer material guidance | PLA; PETG; PETG-CF; PET-CF/GF; HtPA-CF/GF; PA12-CF; HtPA-GF25/CF25 | Exact MD-600 Pro+ product parameter table. Manufacturer categorizes PLA and PETG as common filament and the other listed items as engineering filament; compatibility is manufacturer-stated, not independently tested. | Source |
| Compatible slicers | MINGDA Slicer | Exact MD-600 Pro+ product parameter table lists MINGDA Slicer as supported software. | Source |
Build envelope: Standard build area: MINGDA MD-600 Pro+: 600 × 600 × 600 mm (Source)
Compare this printer on GoodPrints3D
Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.
Catalog record version: 19. Specifications can be updated without changing the rating poll.