LulzBot TAZ SideKick 289: specification reference
Printer type: FDM
This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.
| Specification | Value | Notes | Evidence |
|---|---|---|---|
| Build width | 162 mm | The official 289 brochure compares both SideKick chassis sizes. Toolhead and build surface configurations are not additional printer identities. Do not inherit optional nozzle, filament diameter or hotend specifications. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Build depth | 162 mm | The official 289 brochure compares both SideKick chassis sizes. Toolhead and build surface configurations are not additional printer identities. Do not inherit optional nozzle, filament diameter or hotend specifications. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Build height | 181 mm | The official 289 brochure compares both SideKick chassis sizes. Toolhead and build surface configurations are not additional printer identities. Do not inherit optional nozzle, filament diameter or hotend specifications. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Maximum hotend temperature | 290 C | Manufacturer-stated maximum hot end temperature for the TAZ SideKick 289; a hardware limit, not a recommended print setting or measured result. | Source |
| Maximum bed temperature | 110 C | Manufacturer-stated maximum print surface temperature for the TAZ SideKick 289; a hardware limit, not a recommended print setting or measured result. | Source |
| Manufacturer material guidance | PLA, ABS, ASA, PETg, Nylon, TPU, PC-ABS, and polycarbonate; toolhead and setup dependent | The LulzBot TAZ SideKick User Guide lists these supported material families and specifies 1.75 mm or 2.85 mm filament depending on selected toolhead. Manufacturer-stated capability, not independently verified compatibility. Manual dated 2022-02-09 in the manufacturer document index. A prior unselected draft claim used the wrong source record and should not be selected. | Source |
Build envelope: Standard build area: LulzBot TAZ SideKick 289: 162 × 162 × 181 mm (Source)
Compare this printer on GoodPrints3D
Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.
Catalog record version: 16. Specifications can be updated without changing the rating poll.