Longer LK10 Plus: specification reference
Printer type: FDM
This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.
| Specification | Value | Notes | Evidence |
|---|---|---|---|
| Build width | 320 mm | Exact LK10 Plus model, separate from LK10. Dimensions are explicitly described as build volume in the official catalog FAQ. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Build depth | 320 mm | Exact LK10 Plus model, separate from LK10. Dimensions are explicitly described as build volume in the official catalog FAQ. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Build height | 400 mm | Exact LK10 Plus model, separate from LK10. Dimensions are explicitly described as build volume in the official catalog FAQ. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Extruder type | direct drive | The exact LK10 Plus product page describes an upgraded high-flow direct-drive extruder. | Source |
| Automatic bed leveling | Yes | LONGER FAQ says both LK10 and LK10 Plus use an eddy-current sensor for automatic bed leveling and automatic Z-offset detection. | Source |
| Advertised maximum speed | 500 mm/s | LONGER lists a maximum speed of up to 500 mm/s for the LK10 Plus. Manufacturer-advertised limit, not an independently measured print rate. | Source |
| Manufacturer material guidance | 1.75 mm PLA, PETG, ABS, ASA, TPU, and other filament types | LONGER FAQ says both LK10 and LK10 Plus support 1.75 mm filament including PLA, PETG, ABS, ASA, TPU, and more; listed as manufacturer-stated support, not independently verified compatibility. | Source |
Build envelope: Standard build area: Longer LK10 Plus: 320 × 320 × 400 mm (Source)
Compare this printer on GoodPrints3D
Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.
Catalog record version: 14. Specifications can be updated without changing the rating poll.