Farsoon HT252P: ratings and owner discussion

Farsoon HT252P: specification reference

Printer type: SLS

This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.

Specification Value Notes Evidence
Build width 250 mm Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Build depth 250 mm Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Build height 320 mm Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Machine width 1735 mm Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Machine depth 1205 mm Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Machine height 1975 mm Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Machine weight 1700 kg Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Compatible slicers BuildStar; MakeStar Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Supported operating systems 64-bit Windows 10 Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Laser power 55 W Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Laser type CO2 Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Maximum layer height 0.3 mm Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Minimum layer height 0.06 mm Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Advertised maximum build rate 1.5 L/h Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Maximum SLS chamber temperature 220 C Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Inert-gas process support Yes Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Installed laser count 1 Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source
Advertised maximum scan speed 10 m/s Exact model and stated manufacturer configuration. Build dimensions are nominal rectangular envelope dimensions, not packed part yield. Laser power, count, spot diameter and speed are informational. Powder, layer profile, packing density, warm-up/cooling and accessories affect throughput. October 2024 252P series sheet, HT252P rightmost column, not UT252P or ST252P. 55 W; chamber limit 220 C. The stated build-cylinder envelope has material/part exclusions. 1.5 L/h is conditional on material and part geometry. Nitrogen supply is external. PDF table visually checked. Source

Compare this printer on GoodPrints3D

Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.

Catalog record version: 41. Specifications can be updated without changing the rating poll.

Rate the Farsoon HT252P

How would you rate this printer overall? Choose 1 to 5 stars, where 1 is poor and 5 is excellent. Please vote from hands-on experience and describe your use in a reply. Ownership is not independently verified.

  • 1
  • 2
  • 3
  • 4
  • 5
0 voters

The average and vote count appear as the GP3D Voter Score on GoodPrints3D. Forum sign-in is required to vote. This community rating is separate from specification advantages.