Elegoo Centauri Carbon: ratings and owner discussion

Elegoo Centauri Carbon: specification reference

Printer type: FDM

This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.

Specification Value Notes Evidence
Enclosure Fully enclosed chamber Manufacturer product page describes a fully enclosed chamber. Exact standalone Elegoo Centauri Carbon. Replacement proposal because legacy selected claim has same submitter and reviewer; no independent confirmation of that decision. Source
Maximum hotend temperature 320 C ELEGOO US page says 320°C hotend for the exact Centauri Carbon. Hardware maximum as manufacturer states, not recommended material setting. Source
Maximum bed temperature 110 C ELEGOO US page identifies a 110°C heated bed for the exact Centauri Carbon. Manufacturer hardware limit, not a material-specific bed recommendation. Source
Motion system CoreXY Manufacturer describes the exact standalone Elegoo Centauri Carbon as CoreXY. Replacement proposal because legacy selected claim has same submitter and reviewer; no independent confirmation of that decision. Source
Automatic bed leveling Yes Manufacturer page describes full-auto calibration and auto leveling. Exact standalone Elegoo Centauri Carbon. Replacement proposal because legacy selected claim has same submitter and reviewer; no independent confirmation of that decision. This is manufacturer-described capability, not a test. Source
Filament runout detection Yes ELEGOO US page explicitly describes a filament detection sensor that alerts and halts printing when filament runs out on the exact Centauri Carbon. Source
Power loss recovery Yes ELEGOO US page states printing automatically resumes after power restoration for the exact Centauri Carbon. Manufacturer-described feature. Source
Included camera Yes Manufacturer describes a chamber camera for real-time monitoring and time-lapse on the exact standalone Elegoo Centauri Carbon. Replacement proposal because legacy selected claim has same submitter and reviewer. Source
Wi-Fi Yes ELEGOO US page explicitly lists dual-band Wi-Fi connectivity for the exact Centauri Carbon. Does not establish that printing works offline or without an account. Source
Advertised maximum speed 500 mm/s Manufacturer advertised maximum velocity, 500 mm/s. Exact standalone Elegoo Centauri Carbon. This is a manufacturer limit, not an independently tested print speed. Replacement proposal because legacy selected claim has same submitter and reviewer. Source
Advertised maximum acceleration 20000 mm/s2 Manufacturer advertised maximum acceleration, 20,000 mm/s². Exact standalone Elegoo Centauri Carbon. This is a manufacturer limit, not independently measured performance. Replacement proposal because legacy selected claim has same submitter and reviewer. Source
Manufacturer material guidance ELEGOO shows PLA and PETG use cases and a PLA-CF example, and markets carbon-fiber-reinforced filament capability. These are manufacturer examples and claims, not an exhaustive compatibility list or independent validation. Exact-model manufacturer page. Preserve the material examples and marketing scope; do not imply every formulation is validated or that abrasive filament needs no maintenance. Source
Air filtration Built-in Nano mineral crystal air filter, as described by manufacturer. This is not evidence of measured particle or odor removal efficacy. Exact-model manufacturer feature description. No health or safety performance is claimed. Source

Build envelope: Published build envelope: Elegoo Centauri Carbon standalone printer, US product-page configuration: 256 × 256 × 256 mm (Source)

Compare this printer on GoodPrints3D

Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.

Catalog record version: 43. Specifications can be updated without changing the rating poll.

Rate the Elegoo Centauri Carbon

How would you rate this printer overall? Choose 1 to 5 stars, where 1 is poor and 5 is excellent. Please vote from hands-on experience and describe your use in a reply. Ownership is not independently verified.

  • 1
  • 2
  • 3
  • 4
  • 5
0 voters

The average and vote count appear as the GP3D Voter Score on GoodPrints3D. Forum sign-in is required to vote. This community rating is separate from specification advantages.