Craftbot Flow: specification reference
Printer type: FDM
This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.
| Specification | Value | Notes | Evidence |
|---|---|---|---|
| Build width | 300 mm | Exact named Flow model and manufacturer full build envelope. IDEX and copy/mirror configurations are not inferred. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Build depth | 200 mm | Exact named Flow model and manufacturer full build envelope. IDEX and copy/mirror configurations are not inferred. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Build height | 250 mm | Exact named Flow model and manufacturer full build envelope. IDEX and copy/mirror configurations are not inferred. Current availability unverified. One-time Codex batch, original source independently checked before selection. | Source |
| Maximum hotend temperature | 300 C | Craftbot Flow standard single-head column; official spec says nozzle temperature 40–300°C. Maximum is a manufacturer limit, not a measured result. Do not apply to Flow IDEX or XL without their own source. | Source |
| Maximum bed temperature | 110 C | Craftbot Flow standard single-head column; official spec lists build plate temperature 40–110°C. Maximum is a manufacturer limit, not a measured result. | Source |
| Wi-Fi | Yes | Manufacturer spec lists Wi-Fi for the standard single-head Craftbot Flow. Connectivity is a manufacturer specification, not a current network service guarantee. | Source |
| Included nozzles | 1 | Exact Craftbot Flow standard single-head configuration in the English FLOW/FLOW XL manual. This is not the separate dual-head FLOW IDEX. | Source |
| Manufacturer material guidance | PLA, ABS, HIPS, PET-g, Nylon, TPU, PVA, and Moldlay (wax-like) | Manufacturer-listed supported materials for the standard single-head Flow. This reports the manufacturer's list and does not imply independently verified compatibility for every brand or grade. | Source |
| Compatible slicers | CraftWare | The manufacturer lists CraftWare as supplied software for the FLOW single-head model. The manual describes creating G-code in CraftWare and transferring it by USB or Wi-Fi. | Source |
Build envelope: Standard build area: Craftbot Flow: 300 × 200 × 250 mm (Source)
Compare this printer on GoodPrints3D
Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.
Catalog record version: 17. Specifications can be updated without changing the rating poll.