Bambu Lab H2S: ratings and owner discussion

Bambu Lab H2S: specification reference

Printer type: FDM

This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.

Specification Value Notes Evidence
Build width 340 mm Single-nozzle mode; W maps to X. Source
Build depth 320 mm Single-nozzle mode; D maps to Y. Source
Build height 340 mm Single-nozzle mode; H maps to Z. Source
Machine weight 30 kg Printer net mass; no AMS included. Source
Enclosure Enclosed The generic H2S product page describes sealed-chamber high-temperature 3D printing and door-closed PLA/PETG 3D printing in separate labeled tabs from laser cutting/engraving. No Laser Full Combo or laser upgrade qualification appears in either printing paragraph. This supports the standard H2S printer enclosure; it does not assert laser-rated windows. Source
Active chamber heating Yes Included active heating. Source
Maximum chamber temperature 65 C Controlled chamber maximum. Source
Maximum hotend temperature 350 C Hardware maximum. Source
Maximum bed temperature 120 C Hardware maximum. Source
Filament diameter 1.75 mm Nominal filament diameter. Source
Included nozzle diameter 0.4 mm Standard included nozzle. Source
Included nozzle material Hardened steel Included nozzle. Source
Filament runout detection Yes Included detection. Source
Power loss recovery Yes Supported. Source
Included camera Yes Built-in live view and toolhead cameras; BirdsEye camera is Laser Edition only. Source
Wi-Fi Yes Included Wi-Fi. Source
Ethernet No Explicitly unavailable. Source
Multicolor / multi-material system Optional AMS 2 Pro; included with AMS Combo AMS 2 Pro is an optional accessory on standard H2S and included on H2S AMS Combo. Source
Advertised maximum speed 1000 mm/s Maximum toolhead motion; not measured print throughput. Source
Advertised maximum acceleration 20000 mm/s2 Advertised toolhead maximum. Source
Filament tangle detection Yes Included detection. Source
Included nozzles 1 Standard H2S single nozzle. Source
Manufacturer material guidance PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS; carbon/glass fiber reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA, PPS Printer compatibility; not AMS compatibility or universal nozzle compatibility. Source
Compatible slicers Bambu Studio; third-party standard G-code slicers with feature limitations Manufacturer-listed software. Source

Build envelope: Single-nozzle 3D printing: Bambu Lab H2S standard 3D printer: 340 × 320 × 340 mm (Source)

Compare this printer on GoodPrints3D

Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.

Catalog record version: 40. Specifications can be updated without changing the rating poll.

Rate the Bambu Lab H2S

How would you rate this printer overall? Choose 1 to 5 stars, where 1 is poor and 5 is excellent. Please vote from hands-on experience and describe your use in a reply. Ownership is not independently verified.

  • 1
  • 2
  • 3
  • 4
  • 5
0 voters

The average and vote count appear as the GP3D Voter Score on GoodPrints3D. Forum sign-in is required to vote. This community rating is separate from specification advantages.