Bambu Lab H2S: specification reference
Printer type: FDM
This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.
| Specification | Value | Notes | Evidence |
|---|---|---|---|
| Build width | 340 mm | Single-nozzle mode; W maps to X. | Source |
| Build depth | 320 mm | Single-nozzle mode; D maps to Y. | Source |
| Build height | 340 mm | Single-nozzle mode; H maps to Z. | Source |
| Machine weight | 30 kg | Printer net mass; no AMS included. | Source |
| Enclosure | Enclosed | The generic H2S product page describes sealed-chamber high-temperature 3D printing and door-closed PLA/PETG 3D printing in separate labeled tabs from laser cutting/engraving. No Laser Full Combo or laser upgrade qualification appears in either printing paragraph. This supports the standard H2S printer enclosure; it does not assert laser-rated windows. | Source |
| Active chamber heating | Yes | Included active heating. | Source |
| Maximum chamber temperature | 65 C | Controlled chamber maximum. | Source |
| Maximum hotend temperature | 350 C | Hardware maximum. | Source |
| Maximum bed temperature | 120 C | Hardware maximum. | Source |
| Filament diameter | 1.75 mm | Nominal filament diameter. | Source |
| Included nozzle diameter | 0.4 mm | Standard included nozzle. | Source |
| Included nozzle material | Hardened steel | Included nozzle. | Source |
| Filament runout detection | Yes | Included detection. | Source |
| Power loss recovery | Yes | Supported. | Source |
| Included camera | Yes | Built-in live view and toolhead cameras; BirdsEye camera is Laser Edition only. | Source |
| Wi-Fi | Yes | Included Wi-Fi. | Source |
| Ethernet | No | Explicitly unavailable. | Source |
| Multicolor / multi-material system | Optional AMS 2 Pro; included with AMS Combo | AMS 2 Pro is an optional accessory on standard H2S and included on H2S AMS Combo. | Source |
| Advertised maximum speed | 1000 mm/s | Maximum toolhead motion; not measured print throughput. | Source |
| Advertised maximum acceleration | 20000 mm/s2 | Advertised toolhead maximum. | Source |
| Filament tangle detection | Yes | Included detection. | Source |
| Included nozzles | 1 | Standard H2S single nozzle. | Source |
| Manufacturer material guidance | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS; carbon/glass fiber reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA, PPS | Printer compatibility; not AMS compatibility or universal nozzle compatibility. | Source |
| Compatible slicers | Bambu Studio; third-party standard G-code slicers with feature limitations | Manufacturer-listed software. | Source |
Build envelope: Single-nozzle 3D printing: Bambu Lab H2S standard 3D printer: 340 × 320 × 340 mm (Source)
Compare this printer on GoodPrints3D
Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.
Catalog record version: 40. Specifications can be updated without changing the rating poll.