AXILOOP MC8: ratings and owner discussion

AXILOOP MC8: specification reference

Printer type: FDM

This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.

Specification Value Notes Evidence
Build width 300 mm AXILOOP MC8 base model, manufacturer landing page states a 300×300×300 mm build volume; X/width dimension. Not MC8 Pro-specific. Source
Build depth 300 mm AXILOOP MC8 base model, manufacturer landing page states a 300×300×300 mm build volume; Y/depth dimension. Not MC8 Pro-specific. Source
Build height 300 mm AXILOOP MC8 base model, manufacturer landing page states a 300×300×300 mm build volume; Z/height dimension. Not MC8 Pro-specific. Source
Enclosure Open frame Manufacturer MC8 versus MC8 Pro graphic on source page, checked November 11, 2026: https://b.kickoffpages.com/assets/114484/2f3bcfae-bbea-425d-ab99-d99495db3383/7949f487-10c0-4bb4-a9bb-ef52e2544a36/group-6.png. Prelaunch manufacturer claim; review exact model and conditions. Source
Active chamber heating No AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. Table explicitly marks the base model without chamber temperature control; do not infer heater absence from missing information. Source
Maximum hotend temperature 320 C AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. Earlier August reporting stated 300 C; source describes a later revision to 320 C. Confirm current spec before selecting. Source
Maximum bed temperature 110 C AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. Source
Filament diameter 1.75 mm AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. Source
Included nozzle diameter 0.4 mm AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. 0.4 mm standard; 0.2, 0.6 and 0.8 mm are optional supported sizes. Source
Included nozzle material Hardened steel AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. Source
Automatic bed leveling Yes AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. Source
Filament runout detection Yes AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. Source
Power loss recovery Yes AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. Source
Included camera Yes AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. Source
Wi-Fi Yes AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. Source lists Wi-Fi connectivity and app control; confirm configuration before selection. Source
Multicolor / multi-material system Eight independent toolheads for multicolor and multi-material printing AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. Source
Advertised maximum speed 300 mm/s AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. Source distinguishes 300 mm/s printing from 600 mm/s travel; advertised maximum, not tested throughput. Source
Advertised maximum acceleration 25000 mm/s2 AXILOOP MC8: reported manufacturer-supplied specification table, updated Sept 27, 2026; prelaunch and not independently measured. Reviewer must verify the exact model and current manufacturer configuration. Source
Manufacturer material guidance PLA, PETG, TPU and PVA Manufacturer MC8 versus MC8 Pro graphic on source page, checked November 11, 2026: https://b.kickoffpages.com/assets/114484/2f3bcfae-bbea-425d-ab99-d99495db3383/7949f487-10c0-4bb4-a9bb-ef52e2544a36/group-6.png. Prelaunch manufacturer claim; review exact model and conditions. Source

Compare this printer on GoodPrints3D

Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.

Catalog record version: 26. Specifications can be updated without changing the rating poll.

Rate the AXILOOP MC8

How would you rate this printer overall? Choose 1 to 5 stars, where 1 is poor and 5 is excellent. Please vote from hands-on experience and describe your use in a reply. Ownership is not independently verified.

  • 1
  • 2
  • 3
  • 4
  • 5
0 voters

The average and vote count appear as the GP3D Voter Score on GoodPrints3D. Forum sign-in is required to vote. This community rating is separate from specification advantages.