Anycubic Photon M3 Plus: ratings and owner discussion

Anycubic Photon M3 Plus: specification reference

Printer type: SLA / resin

This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.

Specification Value Notes Evidence
Included camera Yes Official Anycubic Photon M3 Plus wiki states this model includes a built-in camera. Observed 2026-11-14; UK product page configuration unless noted. Source
Wi-Fi Yes Exact Photon M3 Plus parts list includes a WiFi component; model-specific Anycubic Wiki also provides a WiFi connection guide. Observed 2026-11-14; UK product page configuration unless noted. Source
USB printing Yes Product page states Anycubic Cloud supports USB-A 2.0/3.0 control modes for file transfer or printing, establishing USB printing capability. Observed 2026-11-14; UK product page configuration unless noted. Source
Compatible slicers Anycubic Photon Workshop (manufacturer wiki lists V3.1.4) The Photon M3 Plus manufacturer wiki lists Photon Workshop and a download labeled Anycubic Photon Workshop V3.1.4. Observed 2026-11-14; exact Photon M3 Plus documentation. Source
Light wavelength 405 nm The Photon M3 Plus model-specific product description identifies the compatible material as 405 nm UV resin; this is the resin exposure wavelength stated for this model. Observed 2026-11-14; UK product page configuration unless noted. Source
Connectivity USB-A 2.0/3.0; Wi-Fi; LAN/WAN control through Anycubic Cloud Photon M3 Plus product page technical specifications list USB-A 2.0 and 3.0; cloud section names USB-A 2.0/3.0 and LAN/WAN control modes; included parts list labels WIFI. Observed 2026-11-14; UK product page configuration unless noted. Source
Included automatic resin refill Yes Official Photon M3 Plus wiki says the printer has a resin auto-filling module; regional product page also describes automatic feed and lists the auto-feed unit in parts list. Exact standalone model, included feature. Observed 2026-11-14; UK product page configuration unless noted. Source
Resin cure process MSLA (LCD masking) Exact model is specified with a 9.25-inch monochrome LCD exposure screen and parallel matrix light source; LCD masking is the MSLA process. This does not identify it as DLP. Observed 2026-11-14; UK product page configuration unless noted. Source
Resin build-platform leveling 4-point manual leveling Photon M3 Plus technical specifications explicitly say “Machine leveling: 4-point manual leveling”; not automatic/motorized leveling. Observed 2026-11-14; exact Photon M3 Plus documentation. Source
Resin light source Anycubic LighTurbo parallel matrix light source (40 LED beads) Photon M3 Plus technical specification names a parallel matrix light source with 40 LED beads; page feature heading calls it Anycubic LighTurbo. Observed 2026-11-14; UK product page configuration unless noted. Source
Advertised maximum resin speed 100 mm/h Photon M3 Plus maximum printing speed is explicitly listed as ≤100 mm/hour and “maximum … up to 100mm/h”; manufacturer maximum, not an independent tested result. Observed 2026-11-14; UK product page configuration unless noted. Source
Supported resin materials Standard Resin; Plant-Based Resin; DLP Craftsman Resin; UV Tough Resin; Water-Wash Resin+; Standard Resin+; High Clear Resin; ABS-Like Resin V2; High Speed Resin; Standard Resin V2; ABS-Like Resin Pro 2; Tough Resin 2.0; Tough Resin Ultra; ABS-Like Resin Pro; ABS-Like Resin+; Plant-Based Resin+ These exact resin types appear in the current official Photon M3 Plus resin settings table. This is a list of Anycubic parameter references/compatible materials, not independently verified performance or a guarantee every formulation needs identical settings. Observed 2026-11-14; exact Photon M3 Plus documentation. Source
Screen height 3600 pixels Photon M3 Plus specific LCD resolution is listed as 5760 x 3600 pixels; height is the second axis. Observed 2026-11-14; UK product page configuration unless noted. Source
Screen width 5760 pixels Photon M3 Plus specific LCD resolution is listed as 5760 x 3600 pixels; width is the first axis. Observed 2026-11-14; UK product page configuration unless noted. Source

Build envelope: Published build envelope: Anycubic Photon M3 Plus standalone printer, UK product listing: 197 × 122 × 245 mm (Source)

Compare this printer on GoodPrints3D

Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.

Catalog record version: 25. Specifications can be updated without changing the rating poll.

Rate the Anycubic Photon M3 Plus

How would you rate this printer overall? Choose 1 to 5 stars, where 1 is poor and 5 is excellent. Please vote from hands-on experience and describe your use in a reply. Ownership is not independently verified.

  • 1
  • 2
  • 3
  • 4
  • 5
0 voters

The average and vote count appear as the GP3D Voter Score on GoodPrints3D. Forum sign-in is required to vote. This community rating is separate from specification advantages.