Sovol SV06 Plus: specification reference
Printer type: FDM
This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.
| Specification | Value | Notes | Evidence |
|---|---|---|---|
| Maximum hotend temperature | 300 C | Manual V1.0 table: Nozzle temperature ≤300°C, hardware maximum for exact SV06-Plus; not a recommended continuous printing temperature. Manufacturer forum later cautions against prolonged limit-temperature operation. | Source |
| Maximum bed temperature | 100 C | Manual V1.0 table: Hot bed temperature ≤100°C, hardware maximum for exact SV06-Plus. | Source |
| Filament diameter | 1.75 mm | Manual V1.0 table: Diameter of filament 1.75 mm, exact SV06-Plus. No 2.85 mm support evidence. | Source |
| Included nozzle diameter | 0.4 mm | Manual V1.0 table: Nozzle diameter 0.4 mm (Replaceable), exact SV06-Plus. | Source |
| Automatic bed leveling | Yes | Exact original SV06 Plus product page search result describes Auto Bed Leveling and 25-point inductive bed detection. Rendered page failed HTTP 500; reviewer should verify primary page/document. | Source |
| Power loss recovery | Yes | Exact original product page search result lists Resume Printing. Manufacturer feature; ACE not conflated. | Source |
| Advertised maximum speed | 150 mm/s | Official Sovol repository README says 150 mm/s as standard printing speed. Advertised capability, not measured performance; manual calls ≤150 mm/s recommended. | Source |
| Included nozzles | 1 | Manual V1.0 equipment-parameters table explicitly says Number of nozzles: 1 for Model SV06-Plus; not inferred from toolhead/extruder count. | Source |
| Manufacturer material guidance | PLA, ABS, PETG, TPU, wood-filled filament, carbon-fiber-filled filament | Manual V1.0 applicable-filament row lists PLA/ABS/PETG/TPU/WOOD/Carbon Fiber. Manufacturer compatibility list; not every formulation without conditions. | Source |
| Supported operating systems | Windows, Linux, Mac | Manual V1.0 equipment-parameters table lists Windows, Linux, Mac; exact printer. | Source |
Build envelope: Published build envelope: Sovol SV06-Plus (original, standard configuration): 300 × 300 × 340 mm (Source)
Compare this printer on GoodPrints3D
Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.
Catalog record version: 25. Specifications can be updated without changing the rating poll.