INTAMSYS FUNMAT HT: ratings and owner discussion

INTAMSYS FUNMAT HT: specification reference

Printer type: FDM

This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.

Specification Value Notes Evidence
Build width 260 mm Exact FUNMAT HT, not HT Enhanced or PRO variants. The model specific 260 mm cubic envelope is used rather than adjacent columns in the comparison table. Current availability unverified. One-time Codex batch, original source independently checked before selection. Source
Build depth 260 mm Exact FUNMAT HT, not HT Enhanced or PRO variants. The model specific 260 mm cubic envelope is used rather than adjacent columns in the comparison table. Current availability unverified. One-time Codex batch, original source independently checked before selection. Source
Build height 260 mm Exact FUNMAT HT, not HT Enhanced or PRO variants. The model specific 260 mm cubic envelope is used rather than adjacent columns in the comparison table. Current availability unverified. One-time Codex batch, original source independently checked before selection. Source
Enclosure Heated temperature-controlled chamber; manufacturer specifies 90°C constant temperature chamber. Exact FUNMAT HT manufacturer page identifies a 90°C constant-temperature chamber. Manufacturer specification, not an independently measured chamber result. Source
Maximum hotend temperature 450 C Manufacturer lists a 450°C high-temperature extruder with an all-metal hot end for the FUNMAT HT; hardware maximum, not a recommended print setting. Source
Maximum bed temperature 160 C Manufacturer lists a 160°C heated build plate for the exact FUNMAT HT; treated as the stated hardware maximum, not a recommended print setting. Source
Automatic bed leveling Yes Exact FUNMAT HT product page lists an Auto Leveling Function. Source
Manufacturer material guidance PEEK, PEEK-CF, PEEK-GF, PEKK, ABS, PC, PPA-CF, PPA-GF, PPS, PA12-CF, PA6/66, PA6-CF, ASA, PLA. Exact FUNMAT HT column of the manufacturer comparison table lists these 14 materials. Manufacturer-listed capability, not independently verified compatibility; verify material and configuration requirements before use. Source

Build envelope: Standard build area: INTAMSYS FUNMAT HT: 260 × 260 × 260 mm (Source)

Compare this printer on GoodPrints3D

Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.

Catalog record version: 19. Specifications can be updated without changing the rating poll.

Rate the INTAMSYS FUNMAT HT

How would you rate this printer overall? Choose 1 to 5 stars, where 1 is poor and 5 is excellent. Please vote from hands-on experience and describe your use in a reply. Ownership is not independently verified.

  • 1
  • 2
  • 3
  • 4
  • 5
0 voters

The average and vote count appear as the GP3D Voter Score on GoodPrints3D. Forum sign-in is required to vote. This community rating is separate from specification advantages.