Creality K2: specification reference
Printer type: FDM
This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.
| Specification | Value | Notes | Evidence |
|---|---|---|---|
| Machine weight | 18.3 kg | Creality K2 specifications list net weight 18.3 kg; this is the manufacturer’s stated printer weight, not packed shipping weight. | Source |
| Active chamber heating | No | Creality’s K2 launch release explicitly says K2 does not feature active chamber heating. This is not a claim that the chamber cannot warm passively, and it does not establish a maximum chamber temperature. | Source |
| Maximum hotend temperature | 300 C | K2 User Manual V1.0 lists nozzle temperature ≤300 °C for model K2. This is the manufacturer maximum hardware limit, not a material recommendation. | Source |
| Maximum bed temperature | 100 C | K2 User Manual V1.0 lists hotbed temperature ≤100 °C for model K2. This is the manufacturer maximum hardware limit. | Source |
| Filament diameter | 1.75 mm | K2 User Manual V1.0 equipment specifications list 1.75 mm filament diameter for model K2. This nominal diameter alone does not establish whether 2.85 mm filament is supported. | Source |
| Included nozzle diameter | 0.4 mm | K2 User Manual V1.0 lists a 0.4 mm nozzle diameter for model K2. It does not state how many usable nozzles are included. | Source |
| Extruder type | Direct-drive, proximal dual-gear extruder | Creality K2 support parameters describe the extruder as direct; K2 User Manual V1.0 calls it a proximal dual-gear extruder. This describes drive type/gearing, not extruder count or nozzle count. | Source |
| Motion system | CoreXY | Creality K2 Series comparison, K2 column, identifies the motion system as CoreXY. | Source |
| Automatic bed leveling | Yes | K2 User Manual V1.0 equipment specifications list automatic leveling for model K2; this is a manufacturer feature statement. | Source |
| Filament runout detection | Yes | Creality K2 product page describes a built-in filament run-out sensor for accurate filament in/out detection. This is on the standalone printer; do not confuse it with CFS automatic filament relay. | Source |
| Power loss recovery | Yes | K2 User Manual V1.0 equipment specifications list power-loss recovery as supported for model K2. | Source |
| Included camera | Yes | Creality states all three K2 models have an integrated chamber-mounted AI camera for error detection. The K2 row in the manufacturer comparison lists one 720p, 30fps chamber camera. This is an included camera claim, not independent detection performance. | Source |
| Wi-Fi | Yes | K2 User Manual V1.0 lists Wi-Fi at 2.4 GHz for model K2. | Source |
| USB printing | Yes | K2 User Manual V1.0 lists USB flash drive as a printing method. This is direct printing from removable USB storage, not the USB service port. | Source |
| Multicolor / multi-material system | Supports multi-color and multi-material printing when paired with optional CFS; up to four CFS units and 16 colors are described for the series. | Creality says K2 can be paired with CFS for multi-color/multi-material printing, up to four CFS units/16 colors. The standalone US K2 option is sold without CFS; this is optional capability, not included equipment. | Source |
| Advertised maximum speed | 600 mm/s | K2 User Manual V1.0 lists printing speed ≤600 mm/s for model K2. This is the manufacturer maximum, not an independent print-quality or throughput result. | Source |
| Advertised maximum acceleration | 20000 mm/s2 | K2 User Manual V1.0 lists acceleration ≤20,000 mm/s² for model K2. This is a manufacturer limit, not an independent test. | Source |
| Input shaping | Yes | Creality K2 Series comparison, K2 column, marks Input Shaping as present. Manufacturer capability statement; not an independent test. | Source |
| Manufacturer material guidance | PLA, PETG, PET, ABS, PLA-CF | Creality K2 product comparison lists these compatible filaments for the K2 column. This is manufacturer-stated compatibility, not independent material testing. | Source |
| Air filtration | One included air filter | Creality K2-series specifications list one air filter for the K2. This records installed equipment only and does not make a health or safety claim. | Source |
| Compatible slicers | Creality Print 6.0 or newer | K2 User Manual V1.0 lists Creality Print 6.0 and above. Current Creality comparison page likewise says Creality Print 6.0 or newer. No claim is made for other slicers. | Source |
Build envelope: Single Toolhead: K2 (Without CFS): 260 × 260 × 260 mm (Source)
Compare this printer on GoodPrints3D
Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.
Catalog record version: 72. Specifications can be updated without changing the rating poll.