Anycubic Kobra 2 Plus: specification reference
Printer type: FDM
This reference is maintained from the reviewed GoodPrints3D catalog. Manufacturer specifications are not independent performance tests. Missing facts are omitted.
| Specification | Value | Notes | Evidence |
|---|---|---|---|
| Machine width | 605 mm | Manual v1.4 physical dimensions 564 (L) × 605 (W) × 630 (H) mm; W=605. | Source |
| Machine depth | 564 mm | Manual v1.4 physical dimensions 564 (L) × 605 (W) × 630 (H) mm; L/depth=564. | Source |
| Machine height | 630 mm | Manual v1.4 physical dimensions 564 (L) × 605 (W) × 630 (H) mm; H=630. | Source |
| Machine weight | 13 kg | Official product page Tech Specs: Machine Weight 13kg; configuration unspecified beyond exact standalone Kobra 2 Plus listing. | Source |
| Maximum hotend temperature | 260 C | Manual v1.4 Technical Specification > Temperature: Operational Extruder Temperature Max 260°C; hardware limit. | Source |
| Maximum bed temperature | 90 C | Manual v1.4 Technical Specification > Temperature: Operational Print Bed Temperature Max 90°C; hardware limit. | Source |
| Included nozzle diameter | 0.4 mm | Official exact-model Tech Specs: nozzle ø0.4 mm, replaceable. | Source |
| Extruder type | Direct drive | Official exact-model launch table lists Kobra 2 Plus extruder as Direct drive; current product page says direct extruder + double gears. | Source |
| Motion system | Dual-motor dual-Z-axis; X/Y double metal spindle | Official product page features and Tech Specs describe dual-motor dual-Z-axis and double metal spindle X/Y axes. | Source |
| Automatic bed leveling | Yes | Official exact-model Tech Specs: Anycubic LeviQ 2.0 Automatic Leveling System (49-point). | Source |
| Filament runout detection | Yes | Official series table for exact Kobra 2 Plus says Filament detector Yes; launch article model-specific paragraph says equipped with a filament runout detector. | Source |
| USB printing | Yes | Manual v1.4 lists U-DISK as input/connectivity; establishes USB storage input, not a computer service-port use. | Source |
| Advertised maximum speed | 500 mm/s | Official exact-model Tech Specs: 500 mm/s (Max.), 300 mm/s (Typ.). Manufacturer maximum, not independent test. | Source |
| Advertised maximum acceleration | 10000 mm/s2 | Official launch article exact-model table: Accelerated speed 10000 mm/s². Manufacturer specification, not measured result. | Source |
| Extruders | 1 | Manual v1.4 Technical Specification > Printing: Extruder Quantity Single. | Source |
| Manufacturer material guidance | PLA, ABS, PETG, TPU | Current Anycubic Kobra 2 Plus official Tech Specs lists Printing Material: PLA/ABS/PETG/TPU. Manufacturer-stated material list, not a claim of equal performance or independent compatibility testing. | Source |
| Compatible slicers | AC Slicer, Cura, PrusaSlicer | Manual v1.4 Technical Specification lists these supported slicers; current Wiki separately lists Anycubic Slicer Next, not included in this manual claim. | Source |
Build envelope: Published build envelope: Anycubic Kobra 2 Plus standalone printer; manual v1.4 EN: 320 × 320 × 400 mm (Source)
Compare this printer on GoodPrints3D
Use the separate rating poll in this discussion to share your overall experience. Please explain your setup, strengths and problems in a reply.
Catalog record version: 30. Specifications can be updated without changing the rating poll.